DEKKER Technology 
Since its founding in 1998, DEKKER Vacuum Technologies has grown to be one of the top vacuum technology innovators, knowledge sources and suppliers in the world. DEKKER continues its success based on the most essential component needed to serve the industrial vacuum industry – knowledge.
►Vacuum Pump Systems
Vmax Vacuum Pump Systems:
This liquid ring vacuum pump system is designed to use oil as a sealing liquid that can be used for many different applications. Refined and manufactured by the same people who pioneered the concept in the early 80's. Learn more
AquaSeal Vacuum Pump Systems:
This water sealed liquid ring vacuum pump system is designed for a variety of applications. Learn more
ChemSeal Vacuum Pump Systems:
This liquid ring vacuum pump system is designed for recovering different solvents and other chemical applications.
DuraVane Vacuum Pump Systems:
Our rotary vane vacuum pump systems have designs available in lubricated as well as dry models. Learn more
Other Custom-Designed Systems:
These vacuum pump systems have been engineered specifically for application.
►Vacuum Pumps 
DuraVane Vacuum Pumps:
Lubricated or oil-free (dry) models of rotary vane type vacuum pumps are also available. Learn more
TiTAN Pumps:
Single-stage and two-stage liquid ring vacuum pumps. Learn more
Maxima-K Pumps:
These oil lubricated pumps are available in capacities ranging 1500 ACFM to 39,500 ACFM, are available in various materials/coatings and are manufactured to ISO 9001:2008 quality standards. Learn more
HullVac Pumps:
Micron range ultimate vacuum rotary piston and rotary vane pumps for a wide range of industries where performance and reliability are critical. Learn more
►Compressors 
TiTAN-C Compressors:
Liquid ring type compressors in capacities of 15 CFM/3 HP, 30 CFM/5 HP, 60 CFM/7.5 HP and 75 CFM/7.5 HP as well as capacities up to 5000 CFM and 80 PSI.
DuraVane Compressors:
This low-pressure rotary vane type compressor does not require oil for lubrication.
►Maxima-KTM Vacuum SYSTEM
The Maxima-KTM design is a robust, single stage design which utilizes flat port plates mounted on each side of the impeller. The variable discharge port allows the pump to operate efficiently throughout the vacuum range. A heavy duty impeller features reinforcing rings to improve strength of the impeller blades and thus the durability of the pump. Packed gland sealing is standard, featuring a split ring gland for ease of maintenance; mechanical seals are optional. Access plates on both sides of the pump allow for quick access to evaluate clearance and perform boroscope inspection. The Maxima-K pumps are available in capacities ranging 1500 ACFM to 39,500 ACFM, are available in multiple configurations and are manufactured to ISO 9001:2015 quality standards. Bolt in replacements are available for the NASHTM (or Siemens) 2BE series. Selection of Maxima-K versus Maxima-C depends on operating conditions and the most efficient operating point. Learn more
Innovations include:
- Variable discharge port allowing for high operation efficiencies throughout entire vacuum range.
- Impeller features for improved strength of the impeller blades and durability
- Standard packed gland sealing, featuring a split ring gland for ease of maintenance with optional mechanical seals.
- Dual access plates allow quick access to evaluate clearance and perform boroscope inspection
Learn more about the Maxima-K
►MAXIMA-CTM VACUUM SYSTEM
The Maxima-CTM design is a robust design which features conical porting instead of flat plate porting offered on the Maxima-KTM. The cones are attached to the end housing of the pump and protrude into the impeller on both sides. Air enters the impeller in a radial direction versus axially when compared to the flat plate design. The primary benefit of this design is its ability to handle more seal liquid or liquid carryover through the suction compared to the flat plate design with less effect on power consumption and better performance when handling saturated inlet gas. The Maxima-C features a 20 blade shrouded rotor and heavy duty cones and bearings. Packed gland sealing is standard with optional mechanical seals available. Other features include removable bearing brackets, multiple inlet/discharge port configurations and a casing partition allowing for different operating pressures at each inlet port. The Maxima-C pumps are available in capacities ranging from 700 to 22,000 ACFM, multiple material configurations and are manufactured to ISO 9001:2015 quality standards. Bolt in replacements are available for the NASHTM CLTM series, 904TM series and ATTM series. Selection of Maxima-C versus Maxima-K depends on operating conditions and the most efficient operating point. Learn more
Innovations include:
- Cones attachment and air and liquid entrances provide ability to handle more seal liquid or liquid carryover through the suction compared to the flat plate design with less affect on power consumption and better performance when handling saturated inlet gas.
- 20 blade shrouded rotor and heavy duty cones and bearings.
- Standard packed gland sealing, featuring a split ring gland for ease of maintenance with optional mechanical seals
- Removable bearing brackets, multiple inlet/discharge port configurations and a casing partition allowing for different operating pressures at each inlet port.
Learn more about the Maxima-C